[FBM-Team] Unimog U1200, U1400, U1600 v1.1.0 for FS 19
Changelog V1.1:
Support for Universal Passenger (passenger script) installed
Attacher for superstructures added (e.g. for the Hunter4987 superstructure tank)
polygons reduced (almost 50,000 polygons saved)
missing grille decal added
seat rubber fixed
The incorrect wear of some parts has been corrected
camera exchanged (because of black lines across the map)
Slipping of the Unimog in the stand eliminates the
pendulum axle deflection somewhat increased
Chassis for all tires newly adjusted
Speedometer display more precisely adjusted
AO shadow under the front number plate
Hole in the console closed (inner part was slightly shifted).
Front and rear hydraulics now lift further.
Rear hydraulics lifts a little further if platform with cutout or without platform is selected.
Hydraulic sound
added to front and rear hydraulics. Hydraulic
sound added when tilting the platform. Attachment sound better adjusted.
If the roof hatch cannot be opened due to the air conditioning system installed, then the IC trigger crosses are no longer displayed there.The
Unimog could only be filled 98% by the chopper. License plate scaling
adjusted (now more like the original).
Some mod silos could also fill the Unimog without a platform, fixed
braking effect somewhat reduced.
Unimog rolls a little longer out
Clip Distances of the front wheels at 300 meters enlarged
clip Distances from the engine and various chassis parts decreased
When Config with side flaps and cutting, the Unimog loading weight can be attached via Attacher now
platform floor-Colli lowered when the Unimog without trailer and front flap Colli away
Front flap lever in Configs removed without a side wall (due to animation)
Position lights scaled to 0.75 width and the left position light moved to the rear Shift
indicator in the cockpit center section set to dark green
The missing digits 1 3 5 7 in the shift indicator supplemented
flatbed colli did not tip over (fixed)
Tension belts tipped not with (fixed)
Clamping hooks and eyelets on the side wall for the tarpaulin did not work when tipping with the animation with
platform with cut-out now with 2 tension belts (instead of 3)
positioning of the indicator in the front right adapted
Here is another conversion from FBM
Unimog U1200, U1400, U1600
The Unimog has the following features:
Configurable as U1200, U1400 and U1600
6 engine versions from 125 HP to 241 HP
7 platform
configurations Front and rear hydraulics configurable
23 different tire-rim combinations
18 real Unimog colors
Separate loading area concrete weight in the shop category “Weights”
LS19 texture system
RMT (realManualTransmission)
SimpleIC for doors, windows, interior lighting and skylight
Important: For everything to work, at least SimpleIC 0.9.1.7 is required!
— >>> GO TO THE FEEDBACK-THREAD <<< —
Other configuration options:
Roof air conditioning Bull catcher
on the roof
None , one or two rotating lights
With or without Unimog side stickers
Three exhaust variants
Standard sound or gear shift sound
Additional headlights
Sun visor
Horn with horn sound
Different colors and materials for the platform
floor Color config of the tarpaulin
The model was fundamentally renewed and revised with many hours in the respective 3D programs.
We thank BM-Modding for sharing the model with the community.
